Eagle ET-CSWSIU2-BK User Manual

[ ET-CSWSIU2-BK ] Eagle | Consus W-Series SATA / IDE to USB2.0 External Storage System User Manual www.eagle-techusa.com

9SATA Hard Drive Installation 1. Remove 2 screws from the rear. 2. Unplug (D1A, Red-Black Cable) HDD Access LED Connector and unplug (D2A, Blue-Blac

103. Pull out the hard drive tray from the case and unplug the IDE cable and HDD power cable. 4. Connect the SATA data & power cable to the cont

11 5. Connect the SATA connector to the SATA Hard Drive. 6. Tighten up hard drive with 4 screws.

127. Plug in the (Red-Black Cable) “HDD Access LED” connector to D1A and (Blue-Black Cable) “Power LED” Connector to D2A on the controller board.9.

1310. Put the bezel and tighten up with 2 screws at the rear. 11. External Hard Drive Installation Process Completed!

143 Connecting the External Hard Drive Attention:¾ Make sure power switch is OFF when attempt to connect DC power supply socket to the external hard d

15Powering Up the Drive Press the power switch to turn on the unit. Wait 3 seconds after blue light illuminates. Windows 2000/XP/2003/Vista Your opera

164 Partition & Format the Hard DriveWindows XP/2000/2003 Note: For formatted Hard Drive, proceed to step 2. 1. Click the Start button and click o

174. On the next page, choose your partition size then click Next.5. After that, please assign a drive letter for the new Hard Drive, and go to Next

18Allocation unit size as default. Assign a name in Volume label. Check the Perform a quick format to reduce format time. Click Next.7. Confirm your

1Index1 Getting Started Package Contents …………………………………………...……. 02 System Requirements ………………………………………….. 03 Updating Your Operating System ………

1910. Go to My Computer, your new drive should be listed there and ready to use.Mac OS X Note: If the warning does not show up, start at step 2. 1. A

203. Under the Disk Utilities, choose the new hard drive (1) and click Partition (2). Click Options to choose format other than Mac Extended(3) refer

21Figure 1: 3 Options… Choose the partition for you hard drive. Click OK.Figure 2: 6 Format: Choose the format for your hard drive. 4. After the pa

225 Disconnecting the Hard DriveCAUTION: To prevent data loss, be sure to close all active applications before shutting down the drive. Windows XP/200

23Windows 98SE 1. Close all the application on Windows. 2. Be sure the drive isn’t running, press Power switch to shutdown the devices.3. Disconnec

246 TroubleshootingTo search the EAGLE | CONSUS technical support knowledge base and to view a complete list of FAQs for your operating system, visit

25Q: What is JBOD, RAID? A: Redundant Array of Independent Disks (RAID); a collection of storage disks with a controller (or controllers) to manage th

26reporting the drive is busy or in use. A: This is usually caused by a program that is trying to read from the drive. Be sure to close all applicatio

27 If there is a pop-up when trying to transfer data, then click on allow option for requests from the USB or 1394 port. That will open the USB / 1

28Q: Why my Hard Drive isn’t showing the same space as it listed according to hard drive manufacturer? A: This is very common question by everybody. T

21 Getting StartedThank you for purchasing EAGLE | CONSUS W-SERIES product. Eagle | Consus W-Series SATA / IDE to USB2.0 External Storage System. It w

29This formula calculates a number representing the total number of bytes (characters) that can be stored on the hard drive. This is a decimal number,

307 AppendixRegulatory Compliance FCC Class B Information This equipment has been tested and found to comply with the limits for a Class B digital dev

31Copyright Notice All title, copyright and other intellectual property rights in and to any Eagle Tech Products, the “Products” or “Product” (includi

32detailer from whom you originally purchased the Product or visit our product support Web site at www.eagle-techusa.com for information on how to obt

33of Eagle Tech for damages including, but not limited to accidental, consequential, or special damages, or any financial loss, lost profits or expens

34EAGLE | CONSUS Service and Support If you need additional information or help during installation or normal use of this product, visit out product s

358 Understand Eagle Tech Brand

3System RequirementsHardware  Pentium® II, 200 MHz equivalent or newer for IBM compatible PC PowerPC G4, 350 MHz or newer for PowerPC-based Apple C

42 Setting UpYou will need a 3.5 inch SATA / IDE Hard Drive. Carefully follow the procedure to install the hard drive into the enclosure. Note: For pr

5IDE Hard Drive Installation NOTE: For SATA hard drive installation, go to page 9 1. Remove 2 screws from the rear. 2. Unplug (D1A, Red-Black Cable)

63. Pull out the Disk Mounting Tray and connect Power and IDE cable to the hard drive. 4. Tighten up Hard Drives with 4 screws.

75. Plug in the (Red-Black Cable) “HDD Access LED” connector to D1A and (Blue-Black Cable) “Power LED” Connector to D2A on the controller board.6. S

87. Put the bezel and tighten up with 2 screws at the rear. 8. External Hard Drive Installation Process Completed!