Eagle P139-HD User Manual download pdf (Page 7)

GA063-3 Rev F Page

of 33

Port/LED

Function

Co-pilot Headset and H/S3 – H/S7. Co-pilot Headset has relays for the

Co-pilot Emergency Mode and a dedicated COM1 Transmit Keyline.

Gnet Ports 3 and 4. Each port may connect to multiple control panels.

Power and Ground Connections. Individual control lines for Pilot

Emergency Mode and Co-pilot Emergency Mode. Two control panel

Dimmer input lines.

Ethernet port for accessing the Configuration Web Page.

Slot for an MMC card containing the Configuration Web Page software

and backups of previously-saved configurations. The Audio system will

function correctly without an MMC card present, but the Configuration

Web Page will not be available. NOTE: MMC card MUST NOT be

inserted or removed with the power on. MMC card should be

inserted with label facing towards J1.

Power

LED

Green when power is applied.

LED A

System Status LED. Flashes rapidly when system is operating

correctly.

LEDs B

and C

Status LEDs. May be green or red depending on system status. See

Section 10.3

Table 1 P139-HD (D) Connectors

In a single board system J1 and J3 connectors and LED B are not installed and J2

and J4 have the following functions:

Port

Function

Radio Ports COM1 and XCVR2 – XCVR10. COM1 and XCVR10 have

relays for the Pilot Emergency Mode.

Pilot Headset and H/S2 – H/S6. Pilot Headset has relays for the Pilot

Emergency Mode and a dedicated COM1 Transmit Keyline.

Gnet Ports 1 and 2. Each port may connect to multiple control panels.

Table 2 P139-HD (S) Connectors

 Please see drawing G13004 for connector pinouts and cable descriptions.

Not all installations will use all ports, please see installation drawings for

your system.

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

No comments

Eagle P139-HD User Manual Page 7