Eagle EVR-150 Specifications download pdf (Page 22)

22 EAGLE - EVR-150 Installation and Operation Instructions

2-4-1 Set the Backlighting Level

1. Select BACKLIGHT.

2. Select a comfortable backlight level using + or - to change the

setting.

3. Press ENT to enable the setting and return to the menu.

Note that the DISTRESS key backlighting cannot be switched oﬀ

2-4-2 Set the Contrast Level

1. Select CONTRAST.

2. Select a comfortable contrast level using + or - to change the

setting.

3. Press ENT to enable the setting and return to the menu.

2-5 GPS Data and Time (GPS/DATA)

If the boat has an operational GPS navigation receiver, the VHF radio

automatically detects and updates the vessel position and the local

time.

However, if the GPS navigation receiver is disconnected or absent,

you can specify the vessel position and the local time manually,

using the GPS/DATA option.

This information is important because it will be used if a DSC distress call is transmitted.

You can also enter the course (COG) and speed (SOG) and select GPS Alert and GPS Simulator

options.

2-5-1 Manually Enter Position and UTC Time (MANUAL)

Note that this function is available only if an operational GPS receiver is not connected.

1. Select GPS/DATA, then MANUAL.

2. Enter the latitude, then the longitude, then the UTC.

3. Press ENT when all the information is correct.

The vessel’s latitude and longitude are shown on the screen, with the UTC time. The preﬁx

MAN indicates a manual entry. The manual entries are cancelled if a real GPS position is

received.

MANUAL LL

––’ ––’ ––––N

––’ ––’ ––––W

MAN ––:––UTC

GPS/DATA

>MANUAL

SETTING

CONTRAST

LO HI

MENU SELECT

BACKLIGHT

CONTRAST

>GPS/DATA

BACKLIGHT

LO HI

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments

Eagle EVR-150 Specifications Page 22

Comments to this Manuals